Evaluating the state of production reliability and adequacy indicators in the presence of renewable energy sources

  • Mostafa Eidiani Khorasan Institute of Higher Education
  • Amir Ali Puyan Khorasan Institute of Higher Education
Keywords: Renewable energy sources, Reliability, Generation adequacy.

Abstract

With the growing relevance of reliability concerns in power grids and the rising penetration of renewable energy sources in power systems, we've moved on to assessing a model grid in terms of dependability. We also looked at a sample network with and without renewable energy sources, in light of the rising penetration of renewable energy sources. The findings were compared for various circumstances, and the conclusion was that, when used appropriately, these tools can help improve dependability indicators. Finally, a basic guideline is provided for decreasing operational challenges in managing dependability and generation adequacy indicators.

References

Khalili T. Jafari A. Mohammadi-Ivatloo B, “Optimal battery technology selection and incentive-based demand response program utilization for reliability improvement of an insular microgrid.”Energy 162:92–104 ,2016.
[2] Yousefi-khangah B. Ghassemzadeh S. Mohammadi-Ivatloo B, “Short-term scheduling problem in smart grid considering reliability improvement in bad weather conditions.”IET Gener Transm Distrib 11(10):2521–2533 ,2017.
[3] Urgun D. Singh C, “A hybrid Monte Carlo simulation and multi label classification method for composite system reliability evaluation.”IEEE Trans Power Syst 34(2):908–917 ,2019
[4] Zamani-Gargari M. Kalavani F. Mohammadi-Ivatloo B, “Reliability assessment of generating systems containing wind power and air separation unit with cryogenic energy storage.”J Energy Storage 16:116–124 , 2018.
[5] Suthapanun C. Jirapong P. Bunchoo P, “Reliability assessment tool for radial and loop distribution systems using DIgSILENT PowerFactory.”Paper presented at the 12th international conference on electrical engineering/electronics, computer, telecommunications and information technology (ECTI-CON), Hua Hin ,2015.
[6] Sabpayakom N. Sirisumrannukul S, “Power losses reduction and reliability improvement in distribution system with very small power producers.”Energy Procedia 100:388–395 , 2016.
[7] Kamala S. Reddy BD. Sen B, “Improvement of power quality and reliability in the distribution system of petrochemical plants using active power filters.”Paper presented at the IEEE international conference on industrial technology (ICIT), Lyon ,2018.
[8] Astapov V. Trashchenkov S, “Design and reliability evaluation of standalone microgrid”. Paper presented at the 18th international scientific conference on electric power engineering (EPE), Kouty nad Desnou ,2017.
[9] IEEE Std P1366 -2003 (Revision of IEEE Std P1366-1998) IEEE guide for electric power distribution reliability indices. IEEE (2014).
[10] Morteza Zare Oskouri. Behnam Mohammadi-Ivatloo, “Integration of Renewable Energy Sources Into the Power Grid Through PowerFactory” ,Springer, ISBN:978303044376, 2020.
Published
2021-11-01
How to Cite
Eidiani, M., & Puyan, A. (2021). Evaluating the state of production reliability and adequacy indicators in the presence of renewable energy sources. Majlesi Journal of Mechatronic Systems, 10(4), 17-22. Retrieved from https://ms.majlesi.info/index.php/ms/article/view/501
Section
Articles