Controller Design of Two Coupled Inductors in Induction Heating Application
Keywords:
Induction heating, HF inverter, resonance, inductors, control.
Abstract
In this work, we first presented a mathematical modeling of induction heating with two inductors constituted by the assembly (inductors-load to be heated), followed by the diagram of the chosen HF inverter, whose resonance is taken into consideration while applying a capacitor of compositions in series with each inductor. Second, by applying the method of zone control induction heating, we have synthesized suitable control laws in order to control the current flowing in the inductors and consequently the power supplied to the induction heating, the zone control induction heating method is used to cancel the magnetic coupling effects between the inductor currents. The simulation results show the effectiveness of the control strategy.
References
[1] A. Khati, A. Kansab, R. Taleb, H Khouidmi » Current Predictive Controller for High Frequency Resonant Inverter in Induction Heating” International Journal of Electrical and Computer Engineering (IJECE), Vol. 10, No. 1, February 2020, pp. 55~64
[2] A. Khati, A. Kansab, R. Taleb, H Khouidmi » Predictive control of inductor supplied by high frequency inverter for induction heating application” Majlesi Journal of Electrical Engineering, Vol. 8, No.1, 2019
[3] S. Arumugam, S.Ramareddy, “A New Method of APWM Resonant Inverter Topology for High Frequency AC Power Distribution Systems,” Int. J. Advanced Networking and Applications 846 Volume: 02, Issue: 05, Pages: 846-853 (2011).
[4] A. Belkheiri, S. Aoughellanet, M. Belkheiri, FPGA “Implementation of a Space Vector Pulse Width Modulation Technique for a Two Level Inverter”, Elektrotehniški Vestn Ik 85(3):1-7,2018
[5] T. Szelitzky, I. Inoan, M. Tulbure, a.o. neaga, «Complex model of a series load induction heating inverter», Acta Technica Napocensis, Electronics and Communications, Vol.52, N° 01, pp. 23-27, 2011.
[6] T. K. Hassan And E. A. Ali, «Power control of series-parallel resonant inverter for induction heating using buck converter», Journal of Engineering & Technology, Vol.28, N°10, pp. 1934-1959, 2010..
[7] Vimal R. Nakum, Kevin M. Vyas, Niraj C. Mehta, “Research On Induction Heating-A Revie”, International Journal of Science and Engineering Applications,Volume 2 Issue 6,2013, ISSN-2319-7560.
[8] Souley Majid, Maussion Pascal, Ladoux Philippe, Pateau Olivier. “A,Simplified model of a metal disc induction heating system”, HES-10, International symposium on heating by electromagnetic sources, Padua (Italy), May 18-21, 2010, 137-144, ISBN 978-88-89884-13-3.
[9] G. H. Brown, C. N. Hoyler, and R. A. Bierwirth, “Theory and Application of Radio-Frequency Heating” New York: Van Nostrand, 1947.
[10] J. W. Cable, “Induction and Dielectric Heating”. New York,: Reinhold, 1954.
[11] V. Rudnev, D. Loveless, R. Cook, and M. Black,” Handbook of induction heating”. New York: Marcel Dekker Inc., 2003.
[12] J. Davies, “Conduction and Induction heating”. London: Peter Peregrinus Ltd., 1990.
[13] F. Forest, S. Faucher, J.-Y. Gaspard, D. Montloup, J.-J. Huselstein, and C. Joubert, "Frequency-synchronized resonant converters for the supply of multiwindings coils in induction cooking appliances," IEEE Transactions on Industrial Electronics, vol. 54, no. 1, pp. 441-452, February 2007.
[14] V. Geetha, V. Sivachidambaranathan, " An overview of designing an induction heating system for domestic applications," International Journal of Power Electronics and Drive System (IJPEDS), Vol. 10, No. 1, March 2019, pp. 351~356.
[15] Sreenivas Peram, Vaddi Ramesh, J.Sri Ranganayakulu, “Full Bridge Resonant Inverter For Induction Heating Applications”, in International Journal of Engineering Research and Applications (IJERA) ,Vol. 3, Issue 1, January-February 2013, pp.066-073
[16] J. M. Burdío, F. Monterde, J. R. García, L. A. Barragán, and A. Martínez, "A two-output series-resonant inverter for induction-heating cooking appliances," IEEE Transactions on Power Electronics, vol. 20, no. 4, pp. 815-822, July 2005.
[17] Mohsen Siami, S. Asghar Gholamian, “Predictive Torque Control of Three Phase Axial Flux Permanent Magnet Synchronous Machines”, Majlesi Journal of Electrical Engineering , Vol. 6, No. 2, June 2012
[18] J. L. Garriga, M. Soroush, “Model Predictive Control Tuning Methods: A Review”, Ind. Eng. Chem. Res.2010,49, 3505–3515.
[19] S. Vazquez, J. I. Leon, L. G. Franquelo, J. Rodriguez, H. A. Young, A. Marquez and P. Zanchetta, Model Predictive Control: A Review of Its Applications in Power Electronics, IEEE Industrial Electronics Magazine 8(1):16-31 • March 2014.
[2] A. Khati, A. Kansab, R. Taleb, H Khouidmi » Predictive control of inductor supplied by high frequency inverter for induction heating application” Majlesi Journal of Electrical Engineering, Vol. 8, No.1, 2019
[3] S. Arumugam, S.Ramareddy, “A New Method of APWM Resonant Inverter Topology for High Frequency AC Power Distribution Systems,” Int. J. Advanced Networking and Applications 846 Volume: 02, Issue: 05, Pages: 846-853 (2011).
[4] A. Belkheiri, S. Aoughellanet, M. Belkheiri, FPGA “Implementation of a Space Vector Pulse Width Modulation Technique for a Two Level Inverter”, Elektrotehniški Vestn Ik 85(3):1-7,2018
[5] T. Szelitzky, I. Inoan, M. Tulbure, a.o. neaga, «Complex model of a series load induction heating inverter», Acta Technica Napocensis, Electronics and Communications, Vol.52, N° 01, pp. 23-27, 2011.
[6] T. K. Hassan And E. A. Ali, «Power control of series-parallel resonant inverter for induction heating using buck converter», Journal of Engineering & Technology, Vol.28, N°10, pp. 1934-1959, 2010..
[7] Vimal R. Nakum, Kevin M. Vyas, Niraj C. Mehta, “Research On Induction Heating-A Revie”, International Journal of Science and Engineering Applications,Volume 2 Issue 6,2013, ISSN-2319-7560.
[8] Souley Majid, Maussion Pascal, Ladoux Philippe, Pateau Olivier. “A,Simplified model of a metal disc induction heating system”, HES-10, International symposium on heating by electromagnetic sources, Padua (Italy), May 18-21, 2010, 137-144, ISBN 978-88-89884-13-3.
[9] G. H. Brown, C. N. Hoyler, and R. A. Bierwirth, “Theory and Application of Radio-Frequency Heating” New York: Van Nostrand, 1947.
[10] J. W. Cable, “Induction and Dielectric Heating”. New York,: Reinhold, 1954.
[11] V. Rudnev, D. Loveless, R. Cook, and M. Black,” Handbook of induction heating”. New York: Marcel Dekker Inc., 2003.
[12] J. Davies, “Conduction and Induction heating”. London: Peter Peregrinus Ltd., 1990.
[13] F. Forest, S. Faucher, J.-Y. Gaspard, D. Montloup, J.-J. Huselstein, and C. Joubert, "Frequency-synchronized resonant converters for the supply of multiwindings coils in induction cooking appliances," IEEE Transactions on Industrial Electronics, vol. 54, no. 1, pp. 441-452, February 2007.
[14] V. Geetha, V. Sivachidambaranathan, " An overview of designing an induction heating system for domestic applications," International Journal of Power Electronics and Drive System (IJPEDS), Vol. 10, No. 1, March 2019, pp. 351~356.
[15] Sreenivas Peram, Vaddi Ramesh, J.Sri Ranganayakulu, “Full Bridge Resonant Inverter For Induction Heating Applications”, in International Journal of Engineering Research and Applications (IJERA) ,Vol. 3, Issue 1, January-February 2013, pp.066-073
[16] J. M. Burdío, F. Monterde, J. R. García, L. A. Barragán, and A. Martínez, "A two-output series-resonant inverter for induction-heating cooking appliances," IEEE Transactions on Power Electronics, vol. 20, no. 4, pp. 815-822, July 2005.
[17] Mohsen Siami, S. Asghar Gholamian, “Predictive Torque Control of Three Phase Axial Flux Permanent Magnet Synchronous Machines”, Majlesi Journal of Electrical Engineering , Vol. 6, No. 2, June 2012
[18] J. L. Garriga, M. Soroush, “Model Predictive Control Tuning Methods: A Review”, Ind. Eng. Chem. Res.2010,49, 3505–3515.
[19] S. Vazquez, J. I. Leon, L. G. Franquelo, J. Rodriguez, H. A. Young, A. Marquez and P. Zanchetta, Model Predictive Control: A Review of Its Applications in Power Electronics, IEEE Industrial Electronics Magazine 8(1):16-31 • March 2014.
Published
2021-06-01
How to Cite
Khati, A. (2021). Controller Design of Two Coupled Inductors in Induction Heating Application. Majlesi Journal of Mechatronic Systems, 10(2), 1-6. Retrieved from https://ms.majlesi.info/index.php/ms/article/view/482
Issue
Section
Articles
